Викрійка блузи Бет

Blouse details

• Stick 1 part (with a bend)
• Back 1 part (with fold)
• Cuff 2 parts
• Wrapping the neck of the file 1 part (with the fold of the drawing on the file)
• Wrapping the neck of the back 1 part (with a fold of the drawing on the back)

Equipment

• Direct sewing machine
• Overlock
• Household machine (straight stitch and zig-zag)

Allowances for seams of 1 centimeter and 3 centimeters for the hem of the bottom are included in the cut.

Before cutting, the fabric must be washed and ironed (we take into account the properties of natural fabrics, the temperature regime of water, irons, do not dry in the sun, because of the color, we use gentle detergents).

Assembly steps

  1. Sew the upper seam of the sleeve and the shoulder seam in a straight line, overlock (zig-zag), iron the seam on the back.

  2. We process the neck with a turning, or with an oblique tape 3 cm wide, we take the length measured along the sections of the neck plus 5 cm, or with a knitted tape.

  3. The bottom seam of the sleeve and the side seam are sewn in a straight line, overlock (zig-zag) iron the seam on the back. Iron the hem on the hem of the blouse, the cuffs along the long cut.

  4. We sew a ribbon with an ornament on one side of the cuffs (to deviate from the edge or not, in the center of the cuff, depends on the desire, the width of the ribbon, we take into account that the cut of the cuff will be 3 cm. We make a hem of the bottom, sew the ribbon as on the cuffs .

  5. Sew short cuts on the cuffs, spread the seams with an iron in different directions, turn them to the face, fold them nicely and evenly, remove the bottom of the sleeves to the length of the cuffs, sew the cuffs with the sleeves in a straight line, overlock (zig-zag).

We iron everything. BET's blouse is ready.