Викрійка Худі oversize 303

WARNING! Before sewing the decorative tape on the hood and the kipper tape on the neck, it is necessary to check their exact length according to the patterns, taking into account the seam allowances, since the seams can be stretched when sewing the product.

You will need:

• knitted fabric - lining or fleece in the amount of 1.8 m with a width of 1.6 m;
• zippers 18 cm long - 2 pcs.;
• lacquer (or any) tape for finishing the hood with a width of 2.5 cm and a length of 70 cm;
• stripe;
• kipper tape for finishing the neck with a width of 1 cm and a length of 80 cm;
• eyelets - 2 pcs.;
• drawstring for the hood;
• 4 spools of thread in the color of the fabric.

Hoodie production technology:

1. If desired, sew a patch on the shelf, according to the markings on the patterns;
2. Sew the sleeves along the raglan line to the shelf and the back, connecting the corresponding notches;
3. Lay decorative stitches along these seams at a distance of 0.5 cm from the side of the sleeve;
4. Sew one cut of the lower bar to the shelf and back, connecting the notches in the middle of the parts, sweep the second cut of the lower bar;
5. Connect the seams of the sleeves and the side seams to the location of the zipper;
6. Sew the cuffs and sew them to the sleeves;
7. Sew zippers in the side seams above the fold line of the lower bar by 0.5 cm;
8. Hem the ends of the zipper with a bar, turn out the corners, secure the second cut of the bar with a stitch;
9. Lay a decorative stitch along the edges of the zipper at a distance of 0.5 cm;
10. Put the eyelets on the outer hood, according to the markings on the patterns;
11. Connect both parts of the outer hood;
12. Cut the decorative tape to the required length (see the length of the seam on the patterns) and sew in the middle of the seam of the hood;
13. Connect the parts of the inner hood;
14. Sew the outer and inner hoods, lay a decorative stitch that fixes the fold;
15. Sew the hood to the hoodie with an overlap, combining the corresponding notches;
16. Fasten the kipper tape with stitches along the neck line, having previously cut it to the required size, taking into account the allowances for the seam of the joint itself (see the length of the neck seam on the patterns, minus the allowances for the raglan seam;
17. Make the final WTO.